If you’re like most people, you have a lot of electronics in your home. TVs, computers, gaming systems – they all take up a lot of space. When it comes time to move, you don’t want to have to worry about how you’re going to pack up all of your electronics. That’s where the Uhaul TV packing boxes come in! These boxes are specifically designed for packing up your TVs and other large electronics. In this blog post, you will know about the different types of boxes that Uhaul offers and how to use these boxes properly so that your electronics are safe during transit.
Check Out the Latest Uhaul Coupons!
Uhaul TV Boxes
Uhaul TV boxes are sturdy corrugated cardboard boxes that are specially designed for moving televisions. They have internal padding and bracing to protect your TV during transit, and are available for purchase at any Uhaul location. They come in three different sizes: medium, large and extra large. This accommodates most TV models up to 86 inches. now let’s take a look at the specification of these boxes in detail:
Uhaul Expandable Medium TV Moving Box:
The Uhaul medium TV and Monitor moving box is perfect for protecting your small-to-medium flat screen TV or monitor during moving and storage. The kit includes two TV boxes that can accommodate flat-screen TVs and monitors measuring up to 40 inches. And each box has built-in, easy-to-lift handles that help to easily move your TV. In this kit, you will also get four foam pieces that slide over all four corners and provide eight points of protection for the TV. This will help to keep your TV screen from being damaged during transit.
The medium Tv box can hold a maximum weight of 45 pounds. The inner box has a length of 24-1/2 inches, a width of 5-3/8 inches, and a height of 25-1/4 inches. And the outer box is 24-1/4 inches long, 6-1/8 inches wide, and 25-5/8 inches tall.
The box has a fully telescoped length of 48-3/4 inches, but it is recommended to have 4-5 inches of overlap for added protection. The box has an Edge Crush Test (ECT) rating of 36 which means it can withstand up to 36 pounds of pressure per square inch. This box will cost you $15.95 if you purchase it from the Uhaul website.
Uhaul Expandable Large TV Moving Box:
The Uhaul large TV moving boxes kit comes with two heavy-duty TV boxes that can accommodate flat-screen TVs and monitors measuring from 32 inches up to 70 inches. These large boxes are designed to protect your large electronics during a move, while the expandable design allows you to customize the fit to accommodate screens 1-4 inches deep. The boxes are built with easy-to-lift handles and four internal tabs that help to keep the box securely closed during transit. The kit also includes four foam pieces that slide over all four corners of the TV and provide eight points of protection.
The large TV box can hold a maximum weight of 120 pounds. Both the boxes are 36.5 inches long, 6 inches wide, and 40 inches tall. When expanded, the boxes measure 73 inches long with a 4-5 inch overlap (recommended). The kit as a whole weighs 10.40 pounds. If you purchase or pick up boxes from a Uhaul center, they will be pre-assembled.
The box has an Edge Crush Test (ECT) rating of 48 which means it can withstand up to 48 pounds of pressure per square inch. This box will cost you $23.99 if you purchase it from the Uhaul website.
Uhaul Expandable Extra Large TV Moving Box:
The Uhaul extra large TV moving box is designed for protecting flat-screen TVs and monitors measuring from 55 inches up to 86 inches. This box is extra large, so it can accommodate even the largest TVs on the market. The expandable design allows you to customize the fit to accommodate screens 1-4 inches deep. The box also has easy-to-lift handles and four internal tabs that help to keep the box securely closed during transit. The kit includes four foam pieces that slide over all four corners of the TV and provide eight points of protection.
The extra large TV box can hold a maximum weight of 200 pounds. The box itself is 48 inches long, 6 inches wide, and 48 inches tall. When expanded, the box measures 88 inches long with a 4-5 inch overlap (recommended). The kit as a whole weighs 18.40 pounds. If you purchase or pick up boxes from a Uhaul center, they will be pre-assembled.
The box has an Edge Crush Test (ECT) rating of 48 which means it can withstand up to 48 pounds of pressure per square inch. This box will cost you $39.95 if you purchase it from the Uhaul website.
Uhaul Ultimate TV Packing Kit:
The Uhaul ultimate TV packing kit comes with everything you need to safely pack and move your flat-screen TV or monitor. The kit includes two heavy-duty TV boxes that can accommodate screens up to 70 inches, four foam corner pieces for added protection, a furniture pad to help prevent scratches, a box of paper packing tape, a roll of plastic stretch wrap, and an anti-static flat screen TV cover.
This is the most comprehensive TV moving kit offered by Uhaul, and it has everything you need to protect your TV during a move. You can customize This kit according to your need. For example, if you don’t need the anti-static flat screen TV cover, you can remove it from the kit. The kit also includes a box of paper packing tape and a roll of plastic stretch wrap, which can be used to secure the TV boxes during transit. The furniture pad is also included to help prevent scratches on your TV during the move. The price of this kit starts from $56.88.
If you’re looking for a way to move your TV without risking damage, you should consider one of Uhaul’s TV moving boxes. These boxes are designed to protect your TV during transit, and they come in a variety of sizes to accommodate different screen sizes. They’re also easy to assemble and include foam padding to help keep your TV safe. Prices start at $15.95.
How To Use Uhaul TV Box
Now that, you know all about Uhaul’s TV moving boxes, its the time to learn how to use these boxes properly so that your electronics are safe during transit.
To use the kit, you will need:
- A sharp knife
Assembling the Uhaul TV moving box kit:
If you purchase or pick up boxes from a Uhaul center, they will be pre-assembled. But, if you order the kit online, you will need to assemble the box yourself. Here are the instructions on how to do that:
When you receive the kit, separate the outer box, inner box, and foam blocks. First, you’ll need to separate the outer box from the inner box. There should be four foam blocks inside the inner box. Set those aside for now.
Start assembly with the outer box. To begin assembly, start with the outer box. This will give you a good foundation for the rest of the project. Once you have the outer box in place, you can move on to the next steps.
Open the box so that it sits flat on the floor. Once you have the outer box in place, open it up so that it sits flat on the floor. This will give you a better working surface to work with.
Fold in the flaps. To secure the box, you’ll need to fold in the flaps. Start with the small flaps and move to the long flaps. When folding the long flaps, make sure the flap with the large open handhold is on the outside of the box.
Line up the handholds and secure the side flaps with tape. Once you have the flaps folded, it’s time to line up the handholds. There are two handholds on each side of the box. Make sure that they’re lined up even before you secure the side flaps with tape.
The outer box should now be put together (one side will be open). At this point, the outer box should be assembled with one side open. You can now move on to the next steps.
Now that you have the outer box assembled, it’s time to move on to the inner box.
Open up the inner box. The first thing you need to do is open up the inner box. This will give you a better working surface to work with. Then, repeat the same steps as with the outer box. Fold in the flaps and secure the handholds with tape.
When the inner box is assembled, it should be able to slide into the outer box. This will allow you to change the width of the box to perfectly fit your TV.
Make sure that the position of the handles is at the top. This will give you the best possible support for your TV during transit.
Now that you’ve assembled the boxes, it’s time to secure your TV.
Separating the foam pieces to fit your TV:
To separate the four foam pieces, fold the whole foam block in half and break the two halves away from one another, then break those sections apart once more. And you will get four solid foam pieces.
On each foam corner block, you’ll find five breakaway pieces and a crease running down the middle of the foam block. You can remove the breakaway pieces one at a time to fit over the corners of your TV.
Remove the foam piece in the very center and work your way outwards, depending on the size of the corner of your TV. You can use a sharp knife to cut away any excess foam.
Make a 90-degree angle with the piece by folding it along the crease; this will fortify your television on all sides. Use plastic wrap to prevent your corner pieces from moving.
Securing the TV
Place the foam corner pieces on your TV. After attaching the foam corners to your TV, put the TV inside the inner box. To ensure your TV doesn’t move, you can put furniture pads, towels, or other materials between the top of the TV and the box.
Now that you have the inner box and foam corners in place, it’s time to seal up the box.
Place the inner box inside the outer box. You can now place the inner box inside the outer box. Make sure that the position of the handles is at the top.
Secure the lid with tape. Once the inner box is in place, you can secure the lid with tape. Make sure that the lid is flush with the side of the box so that your TV doesn’t move during transit.
Label the box. It’s always a good idea to label the box, so you know what’s inside. You can use a permanent marker to write on the box or use labels and a label maker.
Now that you’ve packed your TV, you’re ready to move. Be sure to secure the box in the moving truck so that it doesn’t move during transit. And you’re all set!
What are some Tips while moving a TV or Monitor?
1. Choose the right size box:
First, you need to choose the right size box for your TV. If you have a small TV, you can use the small TV box. And if you have a large TV, you can use the large TV box. If you’re not sure which size to choose, you can always ask a Uhaul representative for help.
2. Pack the box securely:
Once you have the right size box, you need to pack it securely. Start by placing the foam padding at the bottom of the box. Then, place your TV on top of the padding. If you have a large TV, you may need to use two boxes. Once your TV is in the box, secure it with packing tape.
3. Use stretch wrap:
To further secure your TV during transit, you can use a stretch wrap. Stretch wrap is a plastic film that you can wrap around the box. This will help to keep the box closed and prevent your TV from moving around during transit.
4. Label the box:
Once you’ve packed the box, be sure to label it with the contents and your contact information. This will help the movers to know what’s inside the box and how to reach you if they have any questions.
Following these simple tips will help to ensure that your TV arrives safely at its destination. So, if you’re planning a move, be sure to use Uhaul’s TV moving boxes.
Now that you know how to use a Uhaul TV box, you’re ready to move your TV. Just be sure to pack the box securely and label it with your contact information. And you’re all set!
If you are moving a television, we strongly recommend using a Uhaul TV box. They are specifically designed to protect your TV and will make the moving process much easier. Simply bring the box to your local Uhaul location and purchase it, then pack your TV according to the instructions.
Uhaul TV boxes are an affordable way to protect your valuable television during a move. We highly recommend them for anyone moving a TV.
I hope this article was helpful. Thanks for reading!